Automatic Water Filters Self Cleaning Rotary Filter

Product Detail

Scraper filter introduction 

Inoco scraper filter is automatically controlled, which is the auto self cleaning filter, with feature of automatically operation, high filtration precision, stable and reliable performance, is an effective choice of replacing manual filter or use dumping type material filter, bag filter, basket filter, vibrating screen filter.XF-S1 series cylinder scraper automatic self-cleaning filter is ideal choice of high viscosity filtration, high corrosion resistance, and high pressure liquid, which is self-developed by inoco company, this new generation of mechanical of auto self cleaning filter has reached the world advanced technology level.



Auto filter parts material

Filter body		CS\ SS304\SS316L Resistant to acid alkali corrosion SS316L performance better
Mesh		SS304/SS316L
Drive Shaft seal		PTFE Teflon suitable for all kinds of solvent, acid or alkali liquid, the highest temperature 230?
Sealing ring		NBR acrylic rubber, applicable to most of the neutral and oil liquid, the highest temperature 120?
VITON fluorine rubber		Resistant to acid and alkaline liquid and the majority of the solvent, the highest temperature 230?
Scraper		SF type is super wear resistant composite material, SS type is Wear resistant stainless steel blade
foot support		SS304

 
    

Operation principle 

 Inoco mechanical cleaning filter’s operation principle is very simple: install the filter screen (2) in a stainless steel cylindrical shell(1). When unfiltered liquid flows into the shell from the inlet (3), solid impurities were leached and deposited on the inner surface of the screen. Filtered liquid flows out from the outlet (4). When filter screen need cleaning (depending on the time, pressure differential, or manually choose), a clean dish tightened with spring scrapes the mesh inside surface back and forth constantly and removes the deposition of solid material. When the debris is separated from gap of the filter screen, wash dish will send the dirt into the bottom of the shell (6) and discharged through the flow channel(7).
 Pneumatic cleaning plate drives through air pressure (60-80 psi @ 5 CFM). S-01 and S-02 filter’s main characteristic is that they can be driven by single cylinder or double cylinder. The smaller S- 01 model is only equipped with a cylinder.
 

 

Feature

 i. Scraper filter is not only used for auto water filter, but also widely used in self cleaning filtering of solvents, acid alkali, polymer, coating adhesive materials.
 ii. High efficiency and precision range of 30-1500 microns, liquid viscosity up to 800,000 CP.

Application

 The inoco scraper filter is widely used in water treatment, petrochemical, metallurgy, electric power, chemical, paint, printing ink, paper, food and beverage, pharmaceutical, metal processing industries and etc.

 
  

Selection parameters

Model	XF-S01	XF-S01-T	XT-S02
Weight	35bs(16kg)	75bs(34kg)	215bs(97.5kg)
Height	61.25in(1556mm)	69.25in(1760mm)	102in(2591mm)
Total capacity	0.94gal(3.5liters)	3.9gal(14.8liters)	11gal(41.6liters)
Drain cham ber capacity	4floz(119ml)	25gal(0.74liters)	1.5gal(6liters)
Filter area	112in2 772cm2	264in2 1703cm2	610in2 3935cm2
Flow rate range	2-20gpm/0.45-4.5m3/hr	20-60gpm/4.5-13.6m3/hr	60-200gpm/13.6-45.4m3/hr
Max temperature	350°F(177?)	350°F(177?)	350°F(177?)
Max pressure	300psi(21 bar)	150psi(10.5 bar)standard	150psi(10.5 bar)standard
Air driver need	400/800=60 psiat5 cfm(4 bar 8.5m3/min) 1600=80 psiat5 cfm (5 bar 8.5m3/min)
Control power	available for the three type,limit to automatic 110/220v,50/60 HZ single

FAQ 

 1. How can i get to your factory?
 A:Our factory is near shanghai Airport, we can pick you up in the airport. 2. What is your minimum  2.order quantity, can you send me samples?
 A:Our minimum quantity is 1 set, as our product is machinery equipment, it’s difficult to send you samples, however, we can send you catalogue, warmly welcome you to come visit our company.
 3. Which level of quality are your products?
 A:We have got CE, ISO, SGS, TUV, Rosh, ASME certificate so far.
 4. May i know which payment will be accepted by your company?
 A:So far 100%T/T before shipment, and 30% deposit paid by T/T, balanced paid by L/C are available.
 5. After we placing an order, will you arrange the installation of the machine at present?
 A:All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.
 6.How is your price level?
 A: Factory direct sale, we have whole production line work process from standard products to OEM parts.   

Please feel free to send us your detailed requirements, you would be satisfied with our service.