Automatic Self Cleaning Water Brush Filters

Product Detail

Water filtration introduction 

Self-cleaning filter is suitable for filters with 1’’-36’’ pipeline to choose from, with advantages of continuously fluid flow, safety operation simple maintenance, XF series self –cleaning filter is widely used in all industry area.XF-X05 self cleaning brush filter is with high filtration performance in the condition of filtering precipitated solids, liquid flows in side and out from the side, which is more efficiently in the process of filtration. 

 
  

Working principle 

How it works for XF-X05 brush automatic self cleaning filter 

When the differential pressure of inlet and outlet pipeline reaches the presented value, the filter will start the cleaning process. The whole self-cleaning process contains two steps: the drain valve opens; the two stainless steel brushes which is driven by motor inside will brush off impurities which was captured by the mesh and then impurity will be discharged from drain valve.. The whole cleaning process takes about 15 to 60 seconds, while during this time, the filtration system does not stop flowing and controlled by a control box.

When the pressure differential inside and outside of filter outside of the filter mesh reaches the set default value or when the timing cleaning switch reaches the set time, then system starts the cleaning process.
 The cleaning process is done by a sucking scanner, it makes a spiral scanning movement and absorbs the impurity on the surface of the mesh and discharges through a drain valve, the scanner is driven by a two-way rotation of electric motor through a screw.
 The opening of drain valve is controlled by a two position three-way solenoid valve, the whole process lasts about 35 seconds, in this process system keeps continuous flow. 
 Water is flowing through filter inlet and flows from outside to inside toward coarse mesh then flows through fine mesh out from inside to outside, the impurity will be intercepted by the fine mesh in this process and also forming some pressure loss, coarse mesh is designed to protect the clean equipment and avoid big particles from damaging so that it is not for filtration. 


  

Selection parameters

 

Model No.	X05      -219	X05      -273	X05      -325	X05      -426	X05      -530	X05      -630	X05      -720	X05      -820	X05      -920	X05      -1020
Pipe diameter (mm)	50	80	100	200	250	300	350	400	450	500
Filter flow rate (m3h)	20	50	150	300	500	700	1100	1500	2000	2500
Filtration area (m2)	0.27	0.25	0.35	0.66	1.6	0.85	1.3	1.4	1.8	2.3
Drain valve DN (mm)	25	25	25	50	50	80	80	80	80	80
Clean water consumption per once(L)	80	80	80	150	150	350	450	600	800	1000
Motor power (KW)	0.55	0.55	0.55	0.55	0.55	0.75	0.75	0.75	0.75	0.75

Advantage 

 Contiously water supply, the cleaning process needs little water, which is nearly 1% of filter water yield, the flushing time is 15-60 seconds, the whole system uninterrupted water supply.
 High filtration precision: max value can reach 20 microns, all kinds of precision you can choose.
 Large filtering area: the effective filtering area of standard mesh is 7~40 times of the inlet area.
 Quick reply in after sales within 12 hours ,it is available to supply site service. 


  

Application

?Industrial Water Filtration Application

This brush filter is widely used in cooling water filtration, protect shower nozzle, waste water’s three level treatment, Municipal water reuse, warehouse water treatment, Pre-filtration before RO system, acid pickling, white water filtration of paper, Injection molding machine; Pasteurization system; Vacuum pump system; Air compressor system; Continuous casting system; Water treatment application; The cooling system of heating and heating. 


  

?Agriculture Irrigation filtration Application

Self cleaning brush filter is fitted with stainless steel water filter housing and 200 micron filter material, which will be have best performance in river water purification to remove leaf, sand , solids and suspended solids. Such as underground water, municipal water, river, lake, sea water, garden, nursery, greenhouse, golf courses, park.

FAQ 

 1. If i will need to stay in your place for few days, is that possible to book the hotel for me?
 A:It’s always my pleasure, hotel booking service is available.
 2. What is the delivery time of your machine?
 A:In general, the delivery time of our machine is about 30 days, customized machine will be delivered as the negotiation with our clients.
 3. Can the machine be customized as our need, such as put on our logo?
 A:Surely our machine can be customized as your need, Put on your logo is also available.
 4. About the after-sale service, how can you solve the problems occurred of your overseas customer in time?
 A:The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.
 Quality guarantee: 12 months after the equipment having been operation, but no more than 18 months after the equipment have been delivered (guarantee not include consume parts).
 5. How can i get the after-service?
 A: We will send you the spare parts by free if the problems caused by us. If it is the men-made problems, we also send the spare parts, however it is charged. Any problem, you can call us directly.
 6.What payment terms do you accept?
  A:T/T or L/C or West Union or Moneygram or Paypal, others is welcome. 




Please feel free to send us your detailed requirements, you would be satisfied with our service.